LMR2 Low-medium density residential (2 or 3 storey mix) zone
Neighbourhood Plan:
Moorooka-Stephens district neighbourhood plan
Area:
787m²
Total Frontage:
18.4m
Tenure:
Freehold
Ward:
Coorparoo
Lot 1 of 1
Lot & Plan:
Lot 3 on RP44660
Zone:
LMR2 Low-medium density residential (2 or 3 storey mix) zone
Neighbourhood Plan:
Moorooka-Stephens district neighbourhood plan
Area:
787m²
Total Frontage:
18.4m
Ward:
COORPAROO
Floodwise Report:
Brisbane City Council has prepared property reports with information on flood levels technical information relating to flooding.
Access a Floodwise Report here
SmartMap:
SmartMaps are provided by the Queensland Government and provide information on property boundaries and survey information.
Access a SmartMap for 3RP44660 here
State DA Mapping:
DA Mapping provides information regarding matters of state interest and referral triggers for a development application.
Access DA Mapping for 3RP44660 here
A residential use of premises for one household that contains a single dwelling. The use includes outbuildings and works normally associated with a dwelling and may include a secondary dwelling.
Premises that contain three or more dwellings for separate households.
Zone & Neighbourhood Plan
Site Dimensions
Constraints
Loading
Level of Assessment:
Loading...
Maximum Building Height:
Loading...
Site Cover:
Loading...
Yield:
Loading...
Dual Occupancy
(examples: Duplex)
Premises containing two dwellings on one lot (whether or not attached) for separate households.
Zone & Neighbourhood Plan
Site Dimensions
Constraints
Loading
Level of Assessment:
Loading...
Maximum Building Height:
Loading...
Site Cover:
Loading...
Yield:
Loading...
Subdivision
(examples: Splitter, battle-axe)
The creation of additional and/or new lots by subdividing existing lots. Also includes the creation of easements giving access to a road and rearranging of lot boundaries.
Zone & Neighbourhood Plan
Site Dimensions
Constraints
Loading
Level of Assessment:
Loading...
Where Fronting a Road:
Loading...
House
(examples: House)
A residential use of premises for one household that contains a single dwelling. The use includes outbuildings and works normally associated with a dwelling and may include a secondary dwelling.
Zone & Neighbourhood Plan
Site Dimensions
Constraints
Loading
Found the right property, ready to take the next step?
The creation of additional and/or new lots by subdividing existing lots. Also includes the creation of easements giving access to a road and rearranging of lot boundaries.
Zone & Neighbourhood Plan
Site Dimensions
Constraints
Loading
Found the right property, ready to take the next step?
Identifies sites that have heritage values of local or state significance and regulates development that can take place on or adjoining these sites to protect identified heritage values.
Area adjoining heritage sub-category
Identifies sites that have heritage values of local or state significance and regulates development that can take place on or adjoining these sites to protect identified heritage values.
Traditional character building overlay
Identifies areas where there is a strong traditional building character.
Neighbourhood character sub-category
New development must protect existing pre-1946 buildings and be sympathetic to the traditional building character of the street and local area.
Flooding and Natural Hazards:
Flood overlay
Identifies areas that are subject to various types of flooding and sets requirements for development (including minimum floor levels) to ensure impacts from flooding are minimised. Flood planning areas are ranked from 1 being most extreme to 5 being least extreme based off depth and velocity of flooding.
Overland flow flood planning area sub-category
The Overland flow flood planning area sub-category identifies land that may be subject to flood hazard from localised overland flow flooding.
Noise and Air Quality:
Airport environs overlay
Identifies areas that are in the vicinity of airports and aviation facilities and sets criteria to ensure the protection of the operational space around airports.
Obstacle Limitation Surfaces (OLS) sub-categories
A series of surfaces above ground level which define the operational airspace of an airport. Physical obstruction and emissions are restricted within the OLS.
Procedures for Air Navigation Services - Aircraft Operational Surfaces (PANS-OPS) sub-categories
A series of surfaces above ground level which protect aircraft which are being guided by instruments in low visibility. Physical obstructions are restricted within the PANS-OPS.
Bird and bat strike zone sub-categories
Restricts activities which could attract large numbers of birds and bats into the operational airspace of airports.
Infrastructure:
Critical infrastructure and movement network overlay
Identifies the road based emergency movement and evacuation network within Brisbane.
Critical infrastructure and movement planning area sub-category
Requires that development for emergency services, vulnerable uses or other uses which are required to be accessible or functional in an emergency have access to a hazard free route.
Road hierarchy overlay
Identifies and classifies existing and future road networks to ensure development maintains the function, operation, safety and efficiency of the road network.
Streetscape hierarchy overlay
Standardises treatment of road verges including road verge widths and requires development to provide land dedications where required to meet standard widths.
Miscellaneous:
Dwelling house character overlay
Requires that development for Dwelling houses meet certain criteria in order to protect the residential character of the area.
Site Report by SiteFinder
Instantly find out what you can and can't do to a property in simple yes/no format.
Reverse Search by SiteFinder
Find exactly what you are looking for with our property algorithm.